Page 11 of 54
INSTRUCTION MANUAL
SGTEL-168
TELECOM LINE SURGE GENERATOR
1912 1 E l T o ro R d
●
Si l vera do, Ca lifo rni a 9 26 76
●
(9 49) 459 -96 00
●
co m-p o wer. com
REV070516
FIGURE 2 -
Product Connections/Controls Diagram – Rear Panel
EUT Power Entry Switch
13
Toggles on/off EUT power at the rear entry point, where the EUT power source enters the
generator.
EUT Power Input Port
14
This port connects to the EUT power source. See section 3.5 for input power specifications.
SGTEL-168 System Power Input Port
15
This port connects to the power source for the generator. See section 3.6 for input power
specifications.
SGTEL-168 System Power Switch
16
This switch toggles on/off the SGTEL-168 system input power. When this switch is in the ‘ON’
position, the system may be turned on/off using the System Power Switch, located on the
front panel
7
.
