COM-power corporation CLCI-400, Инструкция по эксплуатации

Страница: 26 / 30

Page 26 of 30
INSTRUCTION MANUAL
SEC TI ON 6
- CALIB RATION & TE ST PROCED URE S – RTCA D O-160 (Secti on 20 )
Rev081219
There are seven severity levels at which the RTCA DO-160G, Section 20 conducted
susceptibility test can be performed (Categories S, T, R, M, W, O and Y). The
category required for a given product may be given in the applicable equipment
performance standard, and are defined in Section 20.2 of the DO-160G standard.
The test levels for the respective categories are defined in Figure 20-6 of the
standard, and are included in Figure 17 below.
The value at any frequency point for any category curve on the Figure 17 graph
can be determined according to the information provided in Table 8.