Columbia Weather Systems CAPRICORN II PLUS, Руководство пользователя

Страница: 24 / 59

24 Capricorn II Plus User Manual
Assembling the Wind Direction Sensor
Figure 8: Wind Direction Sensor
Remove and discard the red vinyl shipping bumper from the threaded direction
shaft.
Place the internal star washer from the Hardware Kit onto the shaft of the wind
direction sensor body so that the washer sits on the inverted nut. (Note: The wind
direction sensor body has two cables attached to it.)
Place a 3/8" wrench on the inverted nut. Holding the direction vane assembly with
one hand, firmly tighten the vane hub onto the nut.
Gently spin the wind direction vane to make sure the wind direction display is func-
tional. The LEDs should light up in sequence around the rosette on the front panel.