62
10
10.1
Instructions for prolonged machine standstills
This chapter provides instructions to be followed for long machine standstills or for the dismantling of
the same.
10.1
Instructions for prolonged machine standstills ................................................................ 62
10.2
Disposal of waste products ................................................................................................ 66
10.3
Dismantling the machine ................................................................................................... 66
WARNING
Before carrying out any procedure on the machine, read Chapter 4, “Precautions for use and maintenance”
with care.
If the compressor is not to be used for prolonged periods, remove the active carbon cartridge from the
strainer filter.
Run the compressor idle for a few minutes to drain off any residue condensate. Stop the compressor,
remove the intake filter, start up the compressor again spraying a few drops of oil into the intake hole so
that a light film of lubricant is sucked in and penetrates the internal parts of the compressor.
Stop the compressor and refit the intake air filter. Clean the external parts and try to remove any saline
humidity and oily deposits. Protect the compressor from dust and water by storing it in a clean, dry
place.
Turn the machine off using the general switch (position “0”) and remove the power plug.
Carry out a general cleaning operation on the machine and all its components.
MODELS WITH INTERNAL COMBUSTION ENGINES
The “Standard” series of compressors run by diesel or petrol engines require additional precautions
due mainly to the presence of the fuel, especially if the compressor has to be moved from its place of
use.
In these cases, apart from the operations to be carried out on the pump unit, it is also necessary to take
the following steps.
NOTE
When the compressor is transported, close the fuel cock on the engine and keep the refill station in a
vertical position at all times to avoid spilling any fuel. Risk of fire or explosion.
Putting the machine out of operation
and dismantling the machine
PUTTING THE MACHINE OUT OF OPERATION
AND DISMANTLING THE MACHINE
Содержание MCH 13/DH
