10
The following information must be referred to and applied only when this manual and the
“Safety regulations” manual have been read and their contents have been understood and
assimilated.
VERSION WITH DIESEL ENGINE
-
Check whether or not the area where the machine is installed has suitable ventilation
(see chapter 6.1).
-
If the machine is installed in a place without the required characteristics above, connect the air intake
extension (see chapter 6.2.1).
-
Connect the refill hoses to the machine (see chapter 6.2.2).
-
Check the level of the lubricating oil in the pump unit (see chapter 8.2). If the level is too low, turn off
the machine and add or change the oil (see chapter 8.1).
-
Check the oil level in the diesel motor using the dipstick provided (see chapter 11.11.2).
-
Add fuel to the tank (diesel fuel of the recommended type).
-
Check the operation of the safety valve (see chapter 9.1).
-
Check for wear on the cylinders to be filled (see chapter 9.1).
-
Fit the hose attachment on the cylinder and check that the taps on the hose are open
(see chapter 9.2).
-
Turn on the cylinder tap and start up the compressor (see chapter 9.2).
-
When the filling operation has been completed, the compressor is stopped automatically by the
pressure switch, turn off the cylinder and the hose taps.
-
Press the pressure bleed button and disconnect the cylinder attachment (see chapter 9.2).
-
Move the fuel lever to the “open” position (in an anti-clockwise direction).
-
Turn the accelerator lever to the “START” position.
ENGINE WITH PULL START
-
Slowly pull the starter cord until a certain resistance is felt.
-
Release the cord slowly. Press the decompression lever downwards. Grip the handle tightly and pull
the cord firmly. Use both hands if necessary.
ENGINE WITH ELECTRIC START
-
Turn the engine starter key to the “START” position and keep it in this position until the engine starts
up.
-
Release the key as soon as the engine starts up.
USE IN BRIEF
Use in brief
Содержание MCH 13/DH
