Colortrac SmartLF Gx/GxT Range Installation and Operating Instructions
PAS161 P/N: P002168 Colortrac Ltd © 2008
24
Scanner UL Certification
Gx/GxT 42 has UL approval. Document ref: E185864 applies.
Gx/GxT 25 is not UL approved.
Stand Accessories
CAN/CSA-C22.2 NO. 60950-1-03 + UL 60950-1 Section 4 Physical requirements
Sub section 4.1 Stability
SmartLF stand accessories (where purchased) have been tested and comply with the stability and general safety
requirements of UL guidelines. The scanner accessories are intended for use only with the SmartLF and must be
assembled by a responsible person following the directions provided in the kits.
(P/N: Gx 42 / Gx 25)
P005300/P005320
Colortrac Floor Stand Gx & GxT model
P005301
Colortrac Computer and LCD Monitor Mounting Kit
P005302/P005322
Colortrac Universal Repro Stand
P005303/P005323
Colortrac Catch Basket Upgrade Kit
EU RoHS and WEEE Directives
Colortrac SmartLF products (from mid-May 2006) are manufactured in accordance with the RoHS
(Restriction of Hazardous Substances) which imposes controls against the use of lead in solder
and other substances harmful to the environment in the production of all new electrical
equipment.
In accordance with the WEEE (Waste Electrical & Electronic Equipment) directive there is a responsibility to ensure
that these devices are recycled or disposed of properly at the end of their useful life.
The WEEE directives require that:
Any part of this device should not be disposed of as unsorted municipal waste
The available return and collection systems should be used
Users of electronic devices recognise that they have a role in contributing to their
reuse, recycling and other forms of recovery
Users are aware of the hazardous substances in electronic devices and that these can
have a potential effect on the environment and human health
Disclaimer
The entire risk of the use or the result of the use of this hardware or documentation remains with the user. No part of this documentation may be
reproduced or transmitted in any means, electronic or mechanical, for any purpose, except with the express prior written permission of Colortrac Ltd.
Colortrac Ltd makes no warranty claims with respect to this documentation and disclaims any implied warranties of merchantability or fitness for a
particular purpose. The information contained in this document is subject to change without notice. Colortrac Ltd assumes no responsibility for
errors or omissions that may appear in this documentation.
Revision 1.5 February 2008
© Colortrac 2007
This document should not be copied without prior permission from:
Colortrac Ltd
Kings Hall
St. Ives Business Park
St. Ives
Huntingdon
Cambridgeshire
PE27 4WY
United Kingdom
Tel: +44 (0) 1480 464618
Fax: +44 (0) 1480 464620
www.colortrac.com
