SmartLF Cx+40 Instruction Manual
Page 10 of 12
2.2
Firmware / Driver Installation.
To install the firmware manually, firstly save the latest firmware .cab file (making sure that
it is for the Cx+ 40 scanner) which contains the latest firmware on to the PC attached to
the scanner, this can be downloaded from:
http://www.colortrac.com/support/support_downloads.htm
1.
Click ‘Install New Firmware’
NOTE: ‘Install New Windows
Driver’ no longer works from the
utilities program, due to changes in
the Microsoft operating systems,
install new drivers in the normal
way through the Device Manager.
2.
Click the ‘Install New Firmware’
button and locate the file you
just saved, this will then install
to the scanner.
3. Power down the scanner and
software, and reboot scanner.
