NOTES:
Cx40 Service Manual
Page 39 of 80
4.
Making sure the cables are inserted the correct way around, insert
all 5 of the CIS ribbon cables into their adjacent connectors. The
exposed ribbon cores must face away from the locking plate of the
connector and must go through the appropriate ferrite, so therefore
the exposed wires is facing AWAY from you, so you will see the
blue backing. This is true for ALL 5 ribbon cables.
5.
Re-insert the power Cable PSU DC O/P from PSU, motor drive
cable and display board ribbon cable making sure they are located
and positioned correctly.
6.
Close the access panel as described in reverse order in chapter
5.3 page 9. Making sure that all cables are within the chassis and
are not damaged by the panel closing.
