COLORADO CLVC-1225SW, Руководство пользователя

Страница: 4 / 5

4
Contents:

Twin chamber ash vacuum incorporating motor, filter housing and anti-fire bag.

1.5mtr Aluminium flexible hose.

Nozzle: Flat nozzle 27cm for hard to reach corners.
A. Installation of the vacuum cleaner
 Unpack the appliance and the accessories. Check the appliance and accessories are in good condition.
(Photo A1)
 Loosen the clasp, and remove the motor / filter cover from the appliance.
 Attach the filter set to the bottom of cover.

Replace the motor / filter cover on the container and tighten the clasp.

Connect the nozzle to the aluminium hose ( Photo A1) Connect the opposite end of the hose to the
appliance.
B. Vacuum ash
 Only use the filter supplied.
 When the vacuum is full or it proves difficult to vacuum more ash, the filter should be removed and
cleaned.

While vacuuming the fireplace ash, the ash temperature must not exceed 50 degrees. (Photo A2).

Do not vacuum ash when fire is not extinguished!
Photo A2
C. After Use

Press the switch to turn off vacuum cleaner.
 Unplug from the wall / electrical supply.
 Roll up the power cable.
 Disassemble the hose from the appliance.
 Remove the motor / filter cover from the appliance.

Empty both chambers and clean.

To clean the filter, remove and wash it carefully (as shown in photo A3). Ensure the filter is completely dry
before re-installing in the Ash Vacuum.
Photo A3
D. Maintenance