4
SMARTHUB
1.2
Statement of Conformity
The SMARTHUB unit and spindle speed sensor are IP67 complaint.
The SMARTHUB device meets the following standards:
European Standards (CE)
•
EMC: EN 301489-1/17
•
Radio: EN 300328 V 1.8.1
•
Safety: EN 61010-1:2010
American Standards (UL)
•
EMC: FCC Part 15 B
•
Radio: FCC Part 15 C
•
Safety: UL 61010-1
Japan / Singapore Standards
•
Radio: Law No. 31
•
ARIB STD T-66
1.3
Safety Warnings
Read the Manual:
Safety of the operator is a main concern. Avoid accidents by reading the
safety alerts and taking a careful approach to handling the equipment.
The operator can avoid many accidents by observing the following
precautions. Review the safety instructions of the manufacturer and all
organizations responsible for the prevention of accidents.
Ensure the Following:
The work area and area around the CNC machine are free of obstacles.
The work area is properly lit. The equipment is operated only by a
responsible adult trained in its operation. The equipment is not
operated by a person under the influence of drugs or alcohol. The
equipment is not operated by a person with any illness or physical
condition that might reduce reflexes or awareness and increase
exposure to risk. Before beginning operation, install all of the safety
devices prescribed by the manufacturer.
Warning:
Always use safety glasses or protective screens to protect your eyes.
GENER
AL
