3
SMARTHUB
1.
GENERAL
1.1.
Compliance and Certification
SMARTHUB is environmental and mechanical laboratory tested and certified.
FCC Compliance Statement:
This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in residential installations. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
and television reception.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause such interference, which can be verified by
turning the device off and on, the user is encouraged to eliminate the interference by
one or more of the following measures:
•
Re-orient or re-locate the receiving antenna.
•
Increase the distance between the device and the receiver.
•
Connect the device to an outlet on a circuit different from the one that supplies
power to the receiver.
WARNING! Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
WARNING! Tablet, RF device, lithium battery, electric device 24V
(AC/DC).
This device complies with FCC Rules Part 15: Operation is subject to two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference that may be received or that may
cause undesired operation.
To comply with FCC Section 1.310 for human exposure to radio frequency
electromagnetic fields, implement the following instruction: A distance of at least 20
cm between the equipment and all persons should be maintained during operation of
the equipment.
GENER
AL
