1. Plug the GFCI into a power outlet, the indicator turns red.
2. Press the test button, the indicator turns off.
3. Press the reset button, the indicator turns red and the spa is
ready for use.
WARNING:
The GFCI plug must be tested before each use to
avoid risk of electric shock.
WARNING:
Before inserting plug into a power outlet, make
sure the current rate of the power outlet is suitable for the
pump.
WARNING:
Do not use the pump if this test fails and contact
our Aftersales Service.
WARNING:
Using an extension lead or multi plug adaptor with
the spa heater can cause the plug to overheat, causing
damage to the equipment and surrounding items. The spa is a
class I electrical appliance and must be connected directly to a
grounded socket. It is recommended to only use a socket which
is resistant to humidity and capable of high power loading.
Regularly check the plug and socket for signs of damage
before using the spa – do not use the spa if the plug or socket
is damaged. If you are unsure about the quality of the electrical
supply, please consult a qualified electrician before use.
-l
o
i
n 5
NOTE:
When inflating, you will notice that air will be expelled from the area
where the air hose connects to the pump, this is normal for technique
requirements.
NOTE:
Do not use an air compressor to inflate the pool.
NOTE:
Do not drag the pool on rough ground
as this may cause damage to the pool liner.
NOTE:
Inflation time for reference only.
It is recommended to find for a professional electrician to
connect the SPA pump to the grounding end of the house with
a solid copper conductor of at least 8AWG (8.37mm
2
).
8
303021236526_14.0x21.0cm_90443E_20N-OEM-381_美国规SPA主体说明书
