7
303021236526_14.0x21.0cm_90443E_20N-OEM-381_美国规SPA主体说明书
GFCI Test
IMPORTANT:
RISK OF ELECTRIC SHOCK. THE GFCI
MUST BE TESTED BEFORE TURNING ON THE PUMP
EACH TIME.
INSTALLATION
Selected Location
IMPORTANT:
Because of the combined weight of the
SaluSpa, water, and users, it is extremely important that the
base where the SaluSpa is installed is smooth, flat, level and
capable of uniformly supporting the weight for the entire time
the SaluSpa is installed (not on the carpet or other similar
material). If the SaluSpa is placed on a surface, which does
not meet these requirements, any damage caused by
improper support is not covered under the manufacturer’s
warranty. It is the responsibility of the SaluSpa owner to
assure the integrity of the site at all times.
1. Indoor Installation:
Be aware of special requirements if you install the spa
indoors.
• Humidity is a natural side effect with SaluSpa installation.
Determine the effects of airborne moisture on exposed
wood, paper, etc. in the proposed location. To minimize
these effects it is best to provide plenty of ventilation to the
selected area. An architect can help determine if more
ventilation is needed.
2. Outdoor Installation:
• During filling, draining or when in use, water may spill out of
the spa. Therefore the SaluSpa should be installed near a
floor drain.
• Do not leave the spa's surface exposed to direct sunlight for
long periods of time.
