22
Run screen with sample status ‘Melting’ in all three capillaries
Run screen with sample status ‘Liquid’ in all three capillaries
A short time after all the samples have become liquid the unit will stop automatically and ‘Finished’
will be displayed on the screen. The unit will automatically start to cool.
❖
When the melting point determination has finished, touch ‘OK’ to save the result.
Note:
It is also possible to stop and save the run as soon as all samples become liquid. Touch ‘STOP
AND SAVE’.
If automatic detection was turned off, the unit will continue heating until the end temperature is
reached. It will then finish and begin to cool.
