background image

WARRANTY

Use only MASTERFLEX precision tubing with MASTERFLEX
pumps to ensure optimum performance. Use of other tubing may
void applicable warranties.

The Manufacturer warrants this product to be free from significant de-
viations from published specifications. If repair or adjustment is neces-
sary within the warranty period, the problem will be corrected at no
charge if it is not due to misuse or abuse on your part, as determined
by the Manufacturer. Repair costs outside the warranty period, or those
resulting from product misuse or abuse, may be invoiced to you.

The warranty period for this product is noted on the Warranty
Card.

PRODUCT RETURN

To limit charges and delays, contact the seller or Manufacturer for au-
thorization and shipping instructions before returning the product, ei-
ther within or outside the warranty period. When returning the product,
please state the reason for the return. For your protection, pack the
product carefully and insure it against possible damage or loss. Any
damages resulting from improper packaging are your responsibility.

TECHNICAL ASSISTANCE

If you have any questions about the use of this product, contact the
Manufacturer or authorized seller.

8

Printed in U.S.A.

020599

Untitled-1

2/17/04, 7:27 AM

12

Содержание Masterflex 7583-50













Отзывы: