Cole Parmer IPSW 100, Руководство пользователя

Страница: 18 / 33

Page 14
7.0
USER PARAMETERS
Pressing the
[Func/C] key during normal operation allows the user to access the parameters
for customizing the scale. The parameters are split into 4 groups:-
1. Check weighing parameters,
2. Percent and Animal Weighing Functions
3. RS-232 parameters
4. Scale parameters
•
When [Func/C] key is pressed, the display will first show
“FunC 1”
for Check weighing
parameters.
•
Press either the [Func/C] key or the [Pcs/

] to advance through the groups
“FunC 1”
,
“FunC 2”
,
“FunC 3”
and
“FunC 4”
. When the required function is displayed, press
[
➔
0/T

] to enter the sub-menu for setting desired parameters for this function.
•
When in one of the sections press [Print/M+/Esc] to regress one step each time. If
you press [Print/M+/Esc] repeatedly, you will exit the User Parameter section and
return to normal weighing.
CHECK WEIGHING PARAMETERS
See section 6.5 for details of using this special weighing mode.
This group of parameters-
- Set low and high limits for check-weighing
- Enables or disables the check weighing alarm
- Enables or disables the negative check weighing
•
Press the [Func/C] key, then [
➔
0/T

], to access the
“ F unC 1”
settings group
“F1 Lo”
parameter.
•
Press [
➔
0/T

] to enter the settings sub-menu and then use the [Unit/

] key and
[Pcs/

] key to select and change the required weight values for the low limit.
•
Press [
➔
0/T

] to confirm the selection and return to
“F1 Lo”.
Advance to the next
parameter
“F2 Hi”
by pressing the [Pcs/

] key and then [
➔
0/T

] to enter the settings
sub-menu. Repeat the above steps to set values for
“F3 bEP”
and
“F4 nCt”
Parameter Description Options
Default
setting
F1 Lo
Set Low limit.
Use the [Unit/

] key and
[Pcs/

] key to set the
values of the lower limit.
When set press the
[
➔
0/T

] key to store the
value and go to F2 Hi
000000
F2 Hi
Set High limit.
Use the [Unit/

] key and
[Pcs/

] key to set the
values of the high limit.
When set press the
[
➔
0/T

] key to store the
value and go to F3 bEP
0000000