Cole Parmer IPSW 100, Руководство пользователя

Страница: 13 / 33

Page 9
WEIGHING A SAMPLE
To determine the weight of a sample, first tare the empty container if it is to be used and then
place the sample in the container. The display will show the net weight of the sample and the
unit of weight currently in use.
PARTS COUNTING
If parts counting is enabled, it is possible to count parts using a sample of the parts to
determine average piece weight.
•
Before starting, tare the weight of any container that may be used, leaving the
empty container on the scale. Place a known number of samples in the
container, if used. The number should match the options for parts counting, i.e.,
10, 20, 50, 100 or 200 pieces.
•
When the scale is showing weight, pressing the [Pcs/

] key will start the parts
counting function.
•
The scale will show “P 10” asking for a sample size of 10 parts. Change the
sample size to the desired quantity by pressing the
[Pcs/

] key. It will cycle
through the options: 10, 20, 50, 100, 200 and back to 10.
•
Press the [
➔
0/T

] key again when the number matches the number of parts
used as the sample. As more weight is added the display will show the number
of parts (Pcs).