6 | Transport
34 / 88
Operating instructions CMVpro 125-400 ATEX | Version 1-en
Claims for damages can only be made within the complaint period and accord-
ing to the general terms and conditions (T&C). Save packing for a possible re-
turn shipment.
5.
Mount fan and place in service only after repairs and resolution of com-
plaints.
6.3
Packing
The packing and provided transport protection protect the fan from transport
damage and environmental influences.
Do not damage the packing, and remove it only shortly before mounting.
Disposal instructions
The transport packing is intended as disposable packing and is to be disposed
of after use according to current local disposal instructions.
6.4
Intermediate storage
Pack the fan in the original packaging as follows:
• Covered, dry, and dust-free location.
• Protect from sun, weather, and condensation.
• Storage tempe10 °C to +50 °C with max. 50 % humidity.
Measures for longer intermediate storage
After every 3 months of storage time, turn the impeller several rotations to pre-
vent bearing damage.
6.5
Transport to installation location
Provide suitable hoisting gear and load handling attachments for transport.
6.5.1
Transport by crane
Transporting package with lifting eye bolts
• Position crane hook over the middle of the package.
• Attach sling to all lifting eye bolts of the packing.
WARNING
Do not lift the fan by the lifting eye bolt of
the electric motor.
• Check: Slings are not twisted. Sling legs and bends are in
permissible positions.
• Lift package slightly and check that it hangs level.
Fig. 17:
Package with lifting eye bolts
• Let down and adjust a package that doesn’t hang level: Shorten or lengthen
legs on one side appropriately until all legs are loaded equally.