COINWASH T3300S, Руководство по обслуживанию

Страница: 64 / 99

29. Door and lint drawer
29
Service
manual
487 0329 21
29.2
Loading door switch
A switch is mounted by the dryer door hinge.
The switch ensures that the dryer stops automatically if the loading door is
opened during operation.
If the dryer does not stop when the loading door is opened, the switch needs
replacing.
Replacing the door switch
1. Disconnect the power supply from the dryer.
2. Remove the door and the front panel from the dryer.
3. Disconnect the wires from the door switch.
4. Dismount the door switch.
5. Mount the new switch.
6. Connect the wires.
7. Re-assemble and test the new door switch, as follows:
Testing the door switch
1. Connect the power supply.
2. Start the dryer.
3. Check that the fan, drum rotation and heat all stop when the door is
opened max. 10 mm(3/8”). If it is possible to open the door more than 10
mm(3/8”) before the dryer shuts off, it is necessary to adjust the activating pin
on the door fig. 1.
1
On some models
On some models, the loading door
switch alone is connected to P12A on
the main circuit board.
On other models, the loading door
switch and the lint drawer switch are in
series, and the combined circuit is
connected to P12A on the main circuit
board.
Refer to the wiring diagram included with
the machine being serviced to identify
the appliccable configuration.