6X-1105D
35
4.5 Assigning the New Camera IP Address
No two devices on a single Ethernet network can have the same IP address. Use the following steps to
change a camera IP address before a second camera is added to the subnet.
•
Set your computer IP address to the same subnet as the camera IP address.
IMPORTANT:
In order to make changes in camera configuration the user must be logged in as Administrator.
•
Change the camera address. The camera address can be changed manually or through a Dynamic
Host Configuration Protocol (DHCP) server. See Operation Manual 6x-1090.
•
Click the camera Setup button.
• Click the Configuration button.
•
Click the Communication tab.
The Communications tab is used for performing network configuration of the camera. Changes to this tab can
only be made by the Admin account. Care must be taken when modifying parameters on this page as the
changes can make the camera inaccessible through the network. Consult with your network administrator
before starting to assign new network settings to ensure that your camera won’t conflict with other devices.
• Write down the new camera address to make the camera easy to find later. If the camera IP address
becomes lost, use the CohuONVIFDiscovery software to find the camera on a network. The software
is available as a free download at
http://www.CohuHD.com/content/downloads.
Under
Software &
Protocol Downloads
see
Setup & Test Applications.
At
Helios and 7500 Camera Series Discovery
Tool
click “download here.” See Section 4.6.
