26
6X-1105D
•
A pole or a corner: Attach the wall mount to the studs on the large pole or large corner
mount and secure with the 5/16-inch nuts and washers (supplied). See Figures 5, 6, 10,
and 11.
• A parapet: Position the wall mount over the flange holes. Secure with four 5/16-inch
fasteners (not supplied).
•
Install the camera system:
•
Position the camera on the mount adapter or adjustable head or pedestal and secure it with
the 1/4-inch stainless steel hardware (supplied).
•
Install the support strut. For mounting on:
•
A wall or parapet: Prepare the surface for the support strut installation. Using the wall
swivel as a template, drill three holes into the mounting surface about 17 inches (430 mm)
from the centerline of the wall mount. See Figures 4,7,9, and 12.
•
A corner and pole: Attach the small corner mount to a wall or the small pole mount to a
pole and secure with fasteners (not supplied) or with the stainless steel mounting straps
(supplied). See Figures 5, 6, 10, and 11.
• A wall, corner, pole, and parapet: Attach the wall swivel to the mounting surface with three
1/4-inch diameter stainless steel fasteners.
•
Attach the clamp swivel to the wall mount with the stainless steel clamp (supplied) and
securely tighten the clamp.
•
For a standalone camera system:
•
Loosen the bolts on the adjustable head and adjust the pan rotation and tilt angle to the
desired position. Retighten the bolts and lock the mount into place.
•
Connect the system cable to the camera system rear plate. See below.
•
Ground the camera:
• Connect the grounding screw on the camera’s rear panel to earth ground using 16
AWG or larger wire and bond to earth ground as close to the camera as possible.
A star washer must be on either side of the grounding lug of the grounding cable
when attached to the rear plate. Refasten the screw securely. Recommended
torque: 12 in-lb.
Schrader Valve
Pressure Relief Valve
(shown with plastic tubing)
Star Washer
Grounding Lug
Star Washer
Grounding Screw
8-32-3/8”L Pan Head Screw
for earth ground connection
8800
HD
Camera System Rear Plate
