34
6X-1105D
4.0 Quick Check
NOTE: All graphics contained within this document, including screenshots and other displays, are for reference use
only and are subject to change.
In order to test the camera system you need the following items:
•
Laptop or desktop computer (for computer requirements see Section 4.1)
•
100/1000BASE-T network card installed in your computer
• Microsoft Internet Explorer, version 8 or 9
•
100/1000BASE-T network switch
•
CAT5e cable
4.1 Computer Requirements
•
Operating System: Windows XP Service Pack 3 (SP3) or newer
•
CPU: Intel i7-860S 2.53 GHz or better
•
Memory: 4GB DDR3@1066MHz or better
•
Hard Drive: 7200 rpm - minimum speed
• Video Card: NVIDIA® GeForce® 9800 GTX+ with 512 MB RAM or better, or high-end ATI
Radeon™ HD series
• Monitor: LCD monitor with 1920 x 1080 or better resolution
• Web Browser: Microsoft Internet Explorer, version 8 or 9
4.2 IP Control and Viewing of Camera
Installation and testing of the camera system can be performed with the built-in Helios Web Interface ap-
plication. The Helios Web Interface is designed to work with Internet Explorer (IE) 8 or 9. To view video
properly in the web interface the signed ActiveX control must be installed in the 32-bit Microsoft® Internet
Explorer® (IE) 8 or 9. If ActiveX is not already installed on your computer, you will be prompted to install it
the first time you access the camera system.
•
Allow the camera system to install Signed ActiveX® control before connecting to the camera system.
4.3 Factory Default IP Address and Settings
The camera is shipped with:
•
IP Address - 192.168.2.150
•
Subnet mask - 255.255.0.0
•
Gateway - 192.168.2.1
4.4 Factory Default User Names and Passwords
• Admin - Camera, case-sensitive
•
Priv - No password
•
User - No password
•
Guest - No password
