6X-1110B
5
Safety instructions
• Installation must be done by qualified installers, and conform to all local codes.
•
It is the user’s responsibility to ensure that the mounting methods are safe and adequate for the
location.
•
Use only stainless steel (SS) hardware to fasten the mount to an outdoor surface.
• All servicing must be performed by qualified service personnel. Procedures in this manual do not
require entry into the housing of the camera system. The unit contains potential high voltage. It also
contains sensitive devices that can be damaged by static discharge. To reduce the risk of electric
shock and damage to the unit by static discharge do not perform any servicing other than described
in these instructions. If the unit is defective, please contact the Customer Service Department for
technical assistance.
•
It is the sole responsibility of the installer to provide proper installation in compliance with all local
codes and regulations.
CAUTION:
Secure the camera system before the power is applied.
WARNING:
Do not open enclosures. There are no user-serviceable parts inside.
CAUTION:
In order to avoid deterioration of the color filter of the sensor and potential discoloration of the image
avoid pointing the camera directly toward the sun or other bright source.
