24
6X-1110B
4.0 Quick Check
NOTE: All graphics contained within this document, including screenshots and other displays, are for reference use
only and are subject to change.
4.1 Control and Viewing of Camera
The WinMPC GUI software is designed to work with the ER8800 Series to view video and control lens and
camera. The software is available as a free download at:
http://www.CohuHD.com/content/downloads.
Under
Software & Protocol Downloads
>
Setup Test Applica-
tions
click Analog WinMPC.
4.2 Checkout Procedure
When power is applied to the camera system the initialization process begins. All CohuHD cameras initial-
ize on power-up using stored default parameters in the camera’s non-volatile memory.
If the camera system does not operate when power is applied, check for:
•
Proper input voltage
•
Proper cable connections
After communication with the camera has been established and the video stream has been started, various
functions must be tested to verify proper operation.
