10
6X-1110B
WARNING:
It is the user’s responsibility to ensure that the mounting methods are safe and adequate for the location.
CAUTION:
Do not allow the full cable weight load to be placed solely at the camera system connector.
3.0 Mounting Methods
The ER8800
series
is designed for outdoor installation.
For installation:
•
Use stainless steel (SS) hardware to fasten the camera system to the mounting bracket and mount-
ing brackets to surfaces.
•
Use anti-seize compound in order to prevent galling on the threads. CohuHD recommends Never
Seez® from Bostick.
•
Use gasket materials, if needed.
•
Use a sealant wrap on the camera system waterproof connectors and their mating system cable
plugs for additional protection against moisture in severe conditions. Coax-Seal® is the recom-
mended product.
•
Mounts, poles, and metallic conduits must be bonded to earth ground.
The following mounts are recommended by CohuHD and can be purchased with the camera system:
Standalone Camera System
1. Pedestal mount kit: CohuHD p/n 8186-1
The kit includes:
Pedestal mount: CohuHD p/n 7411542-001
Adjustable head: CohuHD p/n 7411558-005
2. Wall mount kit: CohuHD p/n 8186-2
The kit includes:
Wall mount: CohuHD p/n 7411417-001
Adjustable head: CohuHD p/n 7411558-005
Support strut: CohuHD p/n 7411558-003
3. Pole mount kit: CohuHD p/n 8186-3
The kit includes:
Wall mount: CohuHD p/n 7411417-001
Adjustable head: CohuHD p/n 7411558-005
Large pole mount: CohuHD p/n 7411408-001
Support strut: CohuHD p/n 7411558-003
Small pole mount: CohuHD p/n 7411558-002
