28
The DLXi ships with the following default settings:
Parameter
Default Setting
Programming Language
CPL - Cognitive Programming Language
Speed
5 ips (127 mm/s)
Label Width
2” Models: 220 (2.2” or 56 mm)
4” Models: 409 (4.09” or 104 mm)
Label Length
Measure label (automatically measures and
sets label length at power up)
Indexing Type
Gap
Reference Point
0,0 (upper left corner)
Auto Top of Form
On
Enable Label Present
Off
Advance Label
75 (0.75” or 19 mm)
Retract Label
75 (0.75” or 19 mm)
Delay Time (Retract Label)
0 seconds
Serial Port Settings
(serial port printers only)
9600 bps, 8 bit data, 1 stop bit, no parity
(DTE configuration - use null-modem cable)
Settings below only apply to printers with Ethernet
Printer IP Address
10.0.0.12
Net Mask
255.255.255.255
Gateway
0.0.0.0
DHCP
On
LPD
On
RTEL
On
RTEL Port Number
9100
