COFFEtek BEAN TO CUP, Техническое руководство

Страница: 21 / 47

COFFE tek LTD
BEAN TO CUP Issue 1 01/12/2005 20
SUP WATER START
0 i.e. The start time of the supplemental water.
SUP WATER DUR
0
i.e. The stop time of the supplemental water.
EXTRA ROTATION
0 i.e. Forces extra rotation of the brewer.
After vend to clear residual grouts if necessary. 1=extra
rotation.
SCALE FACTOR
100% i.e. An overall scaling applied to the drink settings.
(3) To modify a particular variable use the arrow keys to display the appropriate setting
and then press ENTER. The display will change to show the name of the variable on
the top line and below it the text
Value= followed by the current value on the bottom
line.
(4) A flashing cursor will appear over the least significant digit of the current value. The
¿ (UP), À (DOWN), keys can be used to increment or decrement the value as
required. The ½ (LEFT) and ¾ (RIGHT) keys can be used to shift the cursor left and
right to rapidly effect large changes.
(5) When the correct value has been set press ENTER to confirm the change. To
discard the changes press PROG. The display will revert to showing the setting
name and it new value.
S
ELECT
D
RINK TO
T
EST
17. The SELECT DRINK TO TEST option allows any selected drink to be dispensed, while still
in the Engineer's Program, in order to be tested. This facility is useful for testing a drink
that has been modified.
Press DRINK A, for example, to test a change made to the selection in the SELECT DRINK
TO MODIFY option.
O
UTPUT
T
EST
18. The OUTPUT TEST option allows an output device to be operated. The ¿ (UP),
À
(DOWN), keys are used to move through the list of output devices. When the desired
device is displayed use the ENTER key to select the device. The
¿
(UP),
À
(DOWN), keys
are then used to set the state of the device whose name is currently displayed ON and
OFF. To return to the device selection mode press the PROG key
For example, to operate the coffee mixer motor select COFFEE WHIPPER by pressing
¿
until
it appears in the display window, then press ENTER to select the device then press ¿ to
switch the motor ON.
* Due to continuous program intervention these components will not respond to OUTPUT
TEST control.