Coemar Reflection LEDko D Studio, Руководство пользователя

Страница: 6 / 30

6
Safety:
1.
The projector must always be installed with bolts, clamps, or other fixing de-
vices which are suitably rated to support the weight of the projector.
2.
Always use a secondary safety fixing device with chain or steel wire of a suit-
able rating to sustain the weight of the unit in case of failure of the principal
fixing point.
3.
The external surfaces of the unit, at various points, may reach 60°C. Never
handle the unit until at least 10 minutes have elapsed since the LED was
turned off.
4.
Never install the fixture in an enclosed area lacking sufficient air flow; the
room temperature must not exceed 35°C.
5.
The projector contains electronic and electrical components which must un -
der no circumstances be in contact with water, oil or any other liquid. Failure
to do so will compromise the proper functioning of the projector.
2.2
Warranty conditions
1.
The fixture is under warranty for 36 months from the purchase date against factory defec-
tions.
2.
Damage ought to unskillfulness, inappropriate use, or lack of suggested maintenance are
excluded from the warranty.
3.
Warranty expires when the projector is opened by unauthorized personnel.
4.
Warranty doesn’t include the replacement of the fixture.
5.
Serial number and model of the fixture are necessary to retrieve informations and assistance
from the dealer.
2.3
EC Norms
The projector meets all fundamental applicable EC requirements.
3.
The level of technology of
LEDko T/D Studio
requires the use of specialised
personnel for all service applications; refer all work to your authorised Co-
emar
service centre.
4.
A good earth connection is essential for the proper functioning of the projec -
tor. Never connect the fixture if there is no earth connection.
5.
Mains cables must not come into contact with other cables.
6.
Do not operate the projector with wet hands or in an area where water is
present.
7.
The fixture must never be located in an exposed position, or in areas of ex-
treme humidity.