4.5. Barndoors installation
The 4 leaf barndoors (accessory cod.
9829
) can be used to adjust and shape the projected beam angle of the
miniCYC MB
to further
suit your needs.
Prior to undertaking the following procedure, ensure that either the projector is switched off or its dimmer is fully on.
The following pictures indicate the procedure needed to install the barndoors.
1.
Using a suitable tool to remove the four screws
“H”
which affix the frontal plate.
2.
Remove the frontal plate
“L”
.
3.
Install the barndoors
“N”
and replace the four screws
“H”
previously removed.
4.
Position the barndoors to achieve the required effect.
N
L
H
ATTENTION!!
Direct exposure to the output beam of the projector is not recommended.
9
English