By removing the housing in the manner shown below, compete access to the projector’s internals is possible.
1.
Using an appropriate screwdriver, remove the screws
“A”
which affix the
housings and remove it.
To identify which part of the projector must be removed please position
the unit so that the labels of the lampholder group are in the upright posi-
tion. Now lock the unit by the locking device and remove the upper cover.
2.
Take out the two lampholder assembly
“B”
.
3.
Using an appropriate screwdriver, remove the screws
“C”
which affix the
colors changer and the connector
“D”
.
4.
Remove the color changer assembly
“E”
.
Now the assembly can be easy inspected.
5.
Replace and fasten the assembly and the housings as per their original positions.
E
C
C
D
B
A
ATTENTION!!
Always remove mains power and ensure the unit is sufficiently cooled prior to opening up the housing.
10. Opening up the projector
21
English