COE ORCHARD EQUIPMENT INC R Series, Руководство пользователя

Страница: 12 / 48

O peration
9
Shaker operation
INCONTROL DISPLAY
The display is a multi function interface that shows vital engine information as well as any en-
gine fault codes & shaker systems fault codes. The display is connected with the engine &
POWER MAX ECUs & communicates the information of the ECUs. If there is a problem with the
engine, ECUs or machine systems the monitor will then display the ERROR CODE so the repair
can be made.
The display also integrates all switch functions of lights, travel & harvest mode, parking brake,
sweepers, cab pressurizer, engine rpm, fuel level, coolant temp, engine oil pressure, along with
optional features like AXIOM lift & traction.
Engine throttle control is accessed through the display. Press click wheel to bring up tachome-
ter, use wheel to raise or lower rpm, pressing the turtle or rabbit buttons will bring up set RPMs.
Press center of click wheel to close out tachometer adjustment. Engine rpm will display in its
icon tile on the screen.
Adjustments like clamp pressure, sweepers, in-out, head lift & roll speeds settings are adjusta-
ble through the screen. Shake adjustments are also available through the screen as well as the
optional ESHAKE.
SHAKE
Engine RPM needs to be set at 2,000 to 2,400 RPM to have the power & flow available for
shaking. The Hydraulic Throttle Pedal can be used to create variations in the pattern by
depressing or releasing the Hydraulic Throttle Pedal.
All shake patterns have multiple frequencies and can be varied by using MORE or LESS weight.
Engine RPM must be set at a minimum of 1,800 for ESHAKE automated features to function.
AUTO-SHIFT
The R-Series is equipped with auto-shift that automatically upshifts & downshifts depending on
engine rpm, travel speed & Hydraulic Throttle Pedal input. To increase speed depress Hydraulic
Throttle Pedal, to slow release or back off of pedal.
PARKING BRAKE
The shaker is equipped with fail safe parking brakes that can be set while the machine is run-
ning by push button switch on the dash. The brake is set & released by pushing the button on
the INCONTROL display.
Upon start up the brake automatically sets and needs to be released prior to operating. Brake is
automatically set when clamped & releasing when unclamped.
The brake is spring applied and pressure released so in the event of power loss or hose failure
the brake will set. When the machine is turned off the brake sets automatically.
STEERING
The steering system is the same as in an automotive application. Turning the wheel in desired
direction of travel creates travel in that direction. Turning the wheel more or less generates the
desired amount of steering angle.