Page 1 of 11
The Gemineye
TM
CC7008-WK Wireless camera and monitor kit from
Code 3 is designed to provide a driver with video and audio from up
to four cameras individually or together on a split screen for ultimate
driver awareness. When properly installed and used in conjunction
with vehicle mirrors, Code 3’s Gemineye CC7008-WK assists drivers
during hazardous parking and backing situations. This manual
provides information about installation, function, safety, maintenance,
replacement parts and warranty.
Failure to install or use this product according to manufacturer’s recommendations may result in property damage, serious bodily/personal injury,
and/or death to you and those you are seeking to protect!
!
WARNING!
1. Proper installation combined with operator training in the use, care, and maintenance of safety products are essential to ensure the safety of
you and those you are trying to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing, which
can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this safety product. Install this product so that the performance of the system
is maximized and the controls are placed within convenient reach of the operator so that s/he can operate the system without losing eye contact
with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use, the vehicle operator
should ensure the field-of-view of the camera/monitor is not blocked by vehicle components (i.e., open trunks or compartment doors), people,
vehicles, or other obstructions.
6. Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an intersection, driving
against traffic, responding at a high rate of speed, walking on or around traffic lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws regarding
safety products. Therefore, the user should check all applicable city, state, and federal laws and regulations. The manufacturer assumes no
liability for any loss resulting from the use of this safety product.
Do not install and/or operate this safety product unless you have read and understand the safety information
contained
Specifications:
Monitor
CC7008-WK 7” LCD Monitor
LCD Size
7”
Resolution
800 x 3 (RGB) x 480
Contrast
500:1
Brightness
400 cd/m²
Viewing Angle
U: 50 / D: 70, R/L: 70
DOT Pitch
0.0642(W) x 0.1790(H)
Aspect Ratio
16:9
Channel
4 Channels
Operating Frequency
2400 - 2483.5 MHz
Receiving Sensitivity
-89 dBm
Decompression Form
MPEG4
Modulation
2.4G FSK/GFSK
Time Delay
120ms
Transmitting Distance
120 M
Micro-SD/TF Card
Max. 128G
System Format
PAL/NTSC
Power Supply
DC 10-32V
Power Consumption
Max. 6W
Loudspeaker
1.5W/8
Operating Temperature
-20
°
~+70
°
C, RH90%
Storage Temperature
-30
°
~+80
°
C, RH90%
Installation, Wiring and Function
Caution!
When drilling into any vehicle surface, make sure that the area is free from any electrical wires, fuel lines,
vehicle upholstery, etc. that could be damaged.
!
Camera
CC2027-WC
Image Device
1/3” CMOS
TV System
PAL/NTSC
Array Size
728x488 Pixels
Sensing Area
4.6228mm x 3.6112mm
Scanning System
2:1 Interlace
Sync. System
Internal
Resolution
500 TV Lines
Min. Illumination
0.1 Lux (day), 0 Lux (with IR)
Microphone
Yes
Video Output
1.0 vp-p, 75 Ohm
AGC
Auto
S/N Ratio
Better than 48 dB
White Balance
Auto
BLC
Auto
Current Consumption
Max. 250mA@12V/140mA@24V
Operating Frequency
2400-2483.5-MHz
Transmitting Distance
120M (barrier free)
Decompression Form
MPEG4
Transmit Output Power
17 dBm
RF Bit Rate
4Mbps
Operating Temperature
-20
°
C~70
°
C, RH 90% Max.
Storage Temperature
-30
°
C~80
°
C, RH 90% Max.
Installation Instructions
Gemineye™ Wireless
Camera System
