CODAN Infusion device training module & competency assessment
Quality · Reliability · Precision
User Initials…………..
Page 14 of 29
3. Standard Operation
3.3 Infusion: Specifying the Flow Rate and Volume
♦
User Aim – Demonstrate the ability to set up an infusion using Flow
Rate and Volume
Using the numerical keys enter a “flow rate” of 150ml/h
Press the selection key
Enter a “Volume To Be Infused” of 500ml
Press start to begin your infusion
3.4 Infusion: Specifying the Volume and Time
♦
User Aim – Demonstrate the ability to set up an infusion using
Volume to be infused and Time
Press the selection key until “Total Volume” is displayed
Enter your VTBI of 1000ml
Press the selection key until “Total Time” is displayed
Enter your total infusion time of 8 hours
Your rate will automatically be calculated
Press the selection key to check this
Press start to begin your infusion
REMEMBER
If two values are entered the CODAN Argus 718V will
automatically calculate the third
