Coda LINUS10, Руководство пользователя, Страница: 25 / 43

25
LINUS10 4. OPERATION
4.1.4 Delay
Press the “DOWN” button to skip to second operation page.
Move selection field to position “D” (DELAY).
Push the encoder knob on the corresponding output channel that
you want to delay, then choose its value and confirm.
The delay is shown in ms (milliseconds).
4.1.5 Input gain
Adjust the gain (position “G”) of the selected channel and push to
confirm.
4.1.6 Tuning
Go to position “T” and push the ecoder knob to enter tuning page.
Tuning page
- Array (type in total amount of used line array elements
in one hang)
- Sizing
- High Shelf
- Human EQ
- Low Boost
- Sub Sonic
Go to position “EQ” and push the encoder knob to enter full
parametric EQ’s page.
Seven parametric EQs are available.
Please refer to LINUS Control operation manual for detailed
information about tuning tools.
4.1.7 Device information and display settings
Press the "DOWN" button twice (on the main operation page)
to find the information you need.
0 1_ 2_
D 0.0 0.0
G 0.0 0.0
T 1-> 2->
Gain
<-Tune:1 EQ->
Array 8x Sizing 1.0
HFShlf 0.0 Human 0.0
LowBst 0.0 SubSon 0.0
0 1_ 2_
D 0.0 0.0
G 0.0 0.0
T
2-> 1->
Tuning
0 1_ 2_
D
0.0 0.0
G 0.0 0.0
T 1-> 2->
Delay
LINUS10 SERIAL:XXXXXXXX
192.168. 1. 1 FW:3.62
LED METERS:OUTPUT LCD:0
FALLBACK:OFF Lock->
Gain
IP Address
LED Indication
Analog Fallback
Serial number
Firmware version
LCD Contrast
Lock device
I 1K00 0.0 3.00
N 1K00 0.0 3.00
1 1K00 0.0 3.00
1K00 0.0 3.00
<-Tune:1 EQ->
Array 8x Sizing 1.0
HFShlf 0.0 Human 0.0
LowBst 0.0 SubSon 0.0
Full para-
Output Ch Frequency Gain Q Factor
metric EQ