Cocraft HWD 30, Инструкция по эксплуатации

Страница: 8 / 44

EN
G
LI
S
H
8
Things to consider during use
• Make sure that the foam filter is clean and dry before fitting it onto the motor unit
and beginning to wet-vacuum.
• Clean the foam filter regularly. Remove the foam filter and hand wash it with water
and a little mild detergent. Allow the filter to air dry.
• Wipe the container clean and allow it to dry completely before storing it or
continuing with any type of dry vacuuming.
• Don’t forget to fit the cartridge filter and dust bag before beginning any type of dry
vacuuming.
Using the blower function
Screw the suction hose securely onto the hose
connector on the filter cover.
Keep in mind that any dust and debris remaining
in the hose will be ejected when using the blower
function.
Care and maintenance
• Always unplug the vacuum from the wall socket before cleaning/maintenance or
when it is not in use for an extended period.
• Clean the exterior of the vacuum cleaner using a lightly moistened cloth. Use only
mild cleaning agents, never solvents or corrosive chemicals.
• Make sure that all components are completely dry before storing the vacuum in
a dry dust-free place out of the reach of children.
Cleaning the cartridge filter
1. Make sure that the vacuum is unplugged from the mains.
2. Remove the filter.
3. Brush or shake the filter free of dirt and debris in an appropriate outdoor area.
4. Refit the filter.
Cleaning the foam filter
1. Make sure that the vacuum is unplugged from the mains.
2. Remove the filter.
3. Hand wash the filter with mild soapy water and then rinse well with clean water.
4. Allow the filter to air dry. Refit the filter only when it is completely dry.