EN
G
LI
S
H
6
Assembly instructions
1.
Warning:
Always unplug the mains lead from the wall socket before any
maintenance or adjustments.
2. Undo the toggle latches (3) and remove the motor unit from the container.
Remove the accessories from the container. Check that all the parts are intact and
that nothing is missing.
3. Attaching the wheels/castors.
-
Turn the container upside down and press in the castors securely into their
mounting holes.
-
Press the wheels (6a) securely into their mounting holes on the sides of
the container.
4. Refit the motor unit (3) onto the container and fasten it with the latches.
5. Fit both hose brackets (21) one at a time. Lightly squeeze the bracket so that it can
slot into its mounting holes located above the latch. Release the bracket so that it
can expand and slot securely into the mounting holes.
Operating instructions
Warning:
Read all the warnings and safety instructions in the manual before use.
Warning:
Always unplug the mains lead from the wall socket before any maintenance
or adjustments.
Note:
The cartridge filter (11a) is for vacuuming dust. The foam filter (13) must only be
used for vacuuming water. Both the filter cartridge and dust bag (12) must be used
when vacuuming very fine-particled substances.
Power button with power tool socket
Power button
The power button (10) has three settings:
•
I
On
•
0
Off
•
ll
Power tool socket energized, automatic on/off switching
of the vacuum cleaner.
Power tool socket
The power tool socket (9) is designed to allow the connected
power tool to automatically control the on and off switching of
the vacuum cleaner.
1. Plug a circular saw or other appropriate power tool into the on-board power socket.
2. Then connect the suction hose (16) from the vacuum cleaner to the dust extractor
port on the circular saw (or other respective power tool). Set the power switch to
the
II
position.
Содержание HWD 30
Страница 2: ......
