![Cocraft 41-2506 Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/cocraft/41-2506/41-2506_original-instructions-manual_2633266006.webp)
EN
G
LI
S
H
6
• Do not use the product in the rain or in bad weather.
• Do not use the product when you are tired, distracted, or under the influence of
alcohol, medicine or other drugs. Always take a break when you need one.
• Always switch the product off and disconnect it from the mains supply:
-
when it is not in use.
-
when it is being moved or left unattended.
-
before removing material that is jamming the blade.
-
when you are inspecting or cleaning it.
-
when carrying out maintenance or replacing accessories.
-
before it is lifted or moved.
• Do not allow shredded material to accumulate near the ejection port. This might
otherwise hinder proper ejection and force the material back into the hopper.
• Never move or transport the product when it is switched on.
• Keep hands and other body parts away from the mouth of the hopper, the ejection
port and any moving parts.
• In the event of blockages in the hopper mouth or ejection port, switch the machine
off and disconnect it from the power supply before clearing the blockage. Ensure
that the blade and motor are free of debris to protect the motor when the machine
is switched back on. Remember that the blade starts rotating as soon as the
product is switched on.
• Immediately switch off the power and wait until the machine has completely stop-
ped, if the cutting mechanism hits a foreign object, or if the machine starts to make
unusual noises or vibrate. Disconnect the machine from the mains and take the
following steps before restarting and operating the machine:
-
check for damage.
-
replace or repair damaged parts.
-
tighten any loose parts.
Caution:
The following instructions state how damage to the product and possible injury could
be avoided:
• Clean the ventilation slits regularly and follow the care and maintenance instructions.
• Do not overload the machine – work only within the cutting capacity limits. Do not
use the product for heavy work or for purposes for which it has not been designed.
• Only switch the shredder off once the hopper is completely empty, otherwise the
shredder may clog up and not be able to start.
• Never try to repair the product unless you are qualified to do so. All service of the
product other than that mentioned in this instruction manual should be carried out
by qualified personnel and only using original spare parts.
Содержание 41-2506
Страница 2: ......