EN
G
LI
S
H
10
Instructions for use
must not be used for processing earth-covered roots, stones, metal, glass, fabric,
paper or plastic. Neither should the shredder be used for material that does not have a
firm consistency, e.g. kitchen waste.
Switching on/off
1. Connect the shredder to a 230 V, 50 Hz mains outlet protected by a 30 mA
residual current device (RCD).
2. Check that the hopper (15) is empty.
3. Press the rotation direction selector (20) down
to enable the blade to rotate
clockwise. Then press [
l
] (16) to switch the shredder on.
4. Press [
o
] to switch the shredder off.
Reversing the blade to clear jams
The garden shredder is only designed for shredding biodegradable garden
waste such as twigs and branches from bushes, hedges and small trees. It
The rotation direction selector switch must only be used when the shredder is
switched off and the blade drum has stopped rotating.
Switch the shredder off, wait until the blade drum has stopped rotating and set the
selector to
. Press and hold down [
l
] to start the shredder, [
l
] the switch is spring-
loaded and needs to be held down in reverse mode. The blade drum will rotate in
reverse for as long as the switch is held down. This will enable any material which has
fastened in the hopper to be freed and pulled out.
6. Push the collection box into the chassis
(it can only be pushed in from one end)
and slide up the release catch/safety
switch to lock the box in place and
enable the machine to be switched on.
Содержание 41-2506
Страница 2: ......
