Cocraft 41-1821, Оригинальное руководство пользователя

Страница: 6 / 39

EN
G
LI
S
H
6
2
Getting started
1. Attach the wheels, rubber feet and air filter.
Before using the air compressor for the first time:
Open the drain tap (6) in the bottom of the air tank, switch the compressor on
(by pulling the button of the ON/OFF switch (7) up) and let it run for 10 minutes to
lubricate all the moving parts. Close the drain tap.
2. If the oil inlet (4) is fitted with a transit bung,
remove it and replace it with the proper oil
filler cap.
3. Pour approximately 400 ml oil into the oil
inlet and fit the proper oil filler cap. Check
the oil level through the oil level window (5).
4. Place the compressor in a clean, dry and
well-ventilated location.
5. Make sure that it is stable and cannot
tip over.
6. Make sure that the oil level is up to the red
circle in the oil level window (5).
7. Connect the mains lead to a 230 V wall
socket.