EN
G
LI
S
H
16
Note:
• Always begin with the branches lowest down on the trunk.
• Always stand in a well-balanced stable stance.
• Never work whilst standing on a ladder.
• Never saw off a branch which is directly above your head.
• Never overreach, lean too far forward or too far backward.
• Never work in poor light or weather conditions.
• Always use the carrying harness.
• Tidy the work area before beginning work and check the surroundings for foreign
objects that may interfere with proper work safety.
• Always hold the saw with both hands.
Start
• Lubricate the blade with a suitable oil if the hedge trimmer is not to be used for
a long time.
• Clean the exterior of the hedge trimmer using a damp cloth. Use only mild cleaning
agents, never solvents or corrosive chemicals.
• Remove all dirt, especially from around the motor ventilation slits.
• Regularly check and lubricate the blade
with a suitable oil and make sure that all
screws in the blade are properly tightened.
1. Remove the bar guard.
2. Loosen the knob on the carry strap attachment (6)
and adjust the attachment to the desired position.
3. Slide the battery into the battery connector (4) and
make sure that it clicks securely into place.
4. Push the safety catch for the power trigger (3)
forwards and pull the power trigger (2). The pole saw
will now start.
5. The saw will stop automatically if the power trigger
is released.
Care and maintenance
Hedge trimmer
Warning:
• Remove the battery from the hedge trimmer before service and maintenance.
• Wear protective gloves when handling or cleaning the blade.
• Regularly check that the safety catch for the power trigger and the power trigger
are undamaged and work correctly.