EN
G
LI
S
H
11
2
19
18
17
14
5
6
3
Setting cutter depth
• The router is equipped with a depth stop (17)
which is adjusted by turning the locking screw (18).
• When a rough setting has been made fine adjust-
ments can be made using the adjustment screw (2).
• By turning the depth set block (14) the depth of
cut can be altered to one of 6 fixed settings.
• The locking lever (19) is for raising or lowering
the height of the router body. We recommend
that the router is locked when cutting as it is
most stable in that position.
Switching On/Off
Switching on:
Hold in the safety catch (5) and
the power switch (6).
Switching off:
Release the powerswitch.
Setting the speed
Select the speed by turning the speed selector (3).
After running the tool at low speed for a long time,
one should let the motor run at maximum speed for
about 3 minutes to cool it down.
