EN
G
LI
S
H
9
16
8
26
24
28
9
15
Operating instructions
Router cutting fitting
Important!
• Unplug the router before any service
or adjustment.
• Bear in mind that the cutter shank
diameter must be compatible with
both the collet size and speed.
• Turn the router upside down.
• Press in the spindle lock button (16).
• Undo the nut (8) using the spanner (26).
• Insert the cutter using
the appropriate collet, 6 or 8 mm.
• Tighten the collet nut using the spanner.
Attaching and adjusting the parallel guide
• Secure the two guide
rods (28) to the parallel
guide (24) using the screws.
• Undo the locking knobs (9).
• Slide the parallel guide rods
through the holes (15).
• Adjust to a suitable setting.
• Tighten the locking knobs .
