EN
G
LI
S
H
12
Care and maintenance
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
• Clean the exterior of the router by wiping it with a damp cloth. Use only mild cleaning
agents, never solvents or corrosive chemicals. Vacuum them if necessary.
• Keep the motor ventilation openings free from contaminants.
• If the circular saw is not to be used for an extended period, it should be unplugged
and stored in a dry location out of reach of children.
Troubleshooting guide
The router won’t
switch on.
• Make sure that the mains lead is undamaged and securely
plugged into a wall socket.
• Is the wall socket live?
The router
runs slowly.
• Do not force (apply excessive feed pressure on) the router
through the cut. Heavy pressure on the cutter will strain
the motor.
• Is the router cutter blunt or worn? Replace if necessary.
Abnormal noise
and vibration.
• Check that the router cutter is in good condition and is
correctly fitted.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Voltage
230 V AC, 50 Hz
Power
1200 W
No-load speed
11 000–30 000 rpm
Plunge depth
55 mm
Collet chuck
8 mm + 6 mm
Sound pressure level (LpA)
90 dB (A), K = 3 dB(A)
Sound power level (LwA)
101 dB(A), K = 3 dB(A)
Vibration value
a
h
= 5.4 m/s², K = 1.5 m/s²
Weight without accessories
2.7 kg
