Página
78
de
119
safyre
- Manual de usuario/User manual/Manuel de l’utilisateur
MKT-07-M1/20160623/MAN00159
DEVICE MAINTENANCE
Considerations for cleaning and maintenance
For safety reasons, before performing cleaning device, disconnect the power cord from the
wall outlet.
For parts of methacrylate, it should be up care in the use of cleaning products, if the material
comes into contact with substances such as alcohol, solvents, ammonia or other aggressive
products (thinners, acetone... ) reacts to form a " cracks " inside that they do not occur after
cleaning the device, but in the following days.
To clean this material is advisable to use a product -specific methacrylate as the "Vetril” or
use a cloth wrung after being submerged in water with diluted neutral soap.
To clean the device always uses cloth or "soft" roles especially for acrylic surfaces.
Cleaning and sanitizing applicators after each treatment device is encouraged. To do this,
remove remaining product (gel) deposited on the applicator after each treatment and clean and
disinfect the applicator before using again.
Do not use products containing alcohol for
cleaning applicators.
After cleaning the outside of the housing, dry all parts thoroughly, using synthetic fabrics before
starting the device or applicators.
For cleaning TFT screen must use a cotton cloth dampened with water previously drained.
Completely avoid the use of sprays since they penetrate inside the device.
Do not enter the ventilation slots on the device any cleaning product, or attempt to clean the
internal parts that look through them. For no reason the device should be disassembled for
cleaning: no need to clean the inside, and in the event that it was necessary cleaning should
only be performed by authorized for High Technology Products, SL specialized technical staff.
Do not immerse the handpiece in liquid
.
