24
After Sales Support
Telephone:
1300 663 907
Internet:
www.winplus.com.au
To change the operating mode:
Each PIR or Door / Window Sensor can be programmed to the operating modes on page 23.
Follow the below steps to access the operating mode settings.
1. Remove the screw from the bottom of the PIR Sensor or the screw on the back of the
Door / Window Sensor.
2. Remove the front housing cover.
3. Remove the battery.
4. Locate the Mode Setting jumpers. See the diagrams below for the location on each sensor.
5. Using fine tipped pliers arrange the jumpers to match the modes listed on page 23.
6. Reconnect the battery taking note of the polarity.
7. Replace the front housing cover and screw.
8. Test the sensors are working correctly and re-pair them if necessary.
Pir sEnsOr
WindOW / dOOr sEnsOr
Mode Setting
23
A
12
V
LR
6
Mode Setting
