10
After Sales Support
Telephone:
1300 663 907
Internet:
www.winplus.com.au
sTAnd MOunTinG
If you do not wish to attach the Control Panel to a wall, you can use the stand mount.
1.
Remove the Control Panel, Wall Mounting Plate and the stand arm from the
packaging.
2.
With the Wall Mounting Plate removed, slide the notched end of the stand arm into
the slot at the top of the Control Panel.
3.
Attach the Wall Mounting Plate to hold the stand arm in place, ensuring that it is
fully inserted.
4.
Open the rear cover of the Control Panel to:
a. Connect the power adapter inside the Control Panel.
b. Turn the ON/OFF switch to the ON position.
c. Insert the backup batteries (2x Li-Ion rechargeable batteries)
5.
Position the power cable so it exits the battery compartment at the top of the
compartment.
6.
Replace the back cover of the Control Panel.
7.
Replace the Wall Mounting Plate to the back of the Control Panel.
8.
Stand the Control Panel in the desired location.
note: The Wall Mounting Plate will depress the anti-tamper switch, so it must be fully
inserted when using the Control Panel as a freestanding panel. in the event the wall
mounting bracket is removed from the rear of the product, the siren will be triggered.
Configuring Your Alarm
sETTinG yOur Pin
The default pin number for the Control Panel is 1234. We strongly recommend changing this
pin number to something more difficult to guess but easy to remember. To change the pin
number, follow these steps.
1.
Enter the pin number 1, 2, 3, 4
2.
Press the Home Mode button
3.
Enter your new pin number from 4-6 digits
4.
Press the Home Mode button
5.
The new pin number is now active
