Cochran COMMANDER, Руководство пользователя

Страница: 5 / 44

3
SURFACE INTERVAL:
After completion of the Self-Diagnostic mode or after
the Post Dive Interval following a dive, the
COMMANDER enters the Surface Interval. The
Screen displays, if applicable; current Surface Time,
the previous dive’s Maximum Depth, the previous
dive’s Bottom Time, Dive of Day number, current Time
to Fly, Altitude and Temperature. Figure 2 shows the
display with no residual Nitrogen (a clean Dive).
Figure 5 shows the display with residual Nitrogen (a
repetitive dive).
“Surface Time” starts at zero after a dive and begins
counting minutes. If the computer shuts off and is
turned on with Nitrogen residual left, the Surface Time
continues to count. If the computer shuts off and is
turned on with no Nitrogen residual left, the Surface
Time will be zero.
“Dive of Day” starts at zero and increments after each
dive regardless of the calendar day. When there is no
remaining Nitrogen residual, the Dive of Day is set to
zero and the computer is referred to as a “clean”
system.