Cochran COMMANDER, Руководство пользователя

Страница: 23 / 44

2 1
SENSOR WARNING:
The COMMANDER has the
capability of monitoring the integrity of its' sensors,
both the low-pressure (depth/altitude) and the
temperature. When the computer detects an error in
one of the transducers, the diver is alerted to this
condition by the illumination of the “WARNING”
legend, and the computer will also issue a 5-beep two
tone audible alarm once every two minute to alert the
diver to this condition. The Maximum Depth will be
replaced with “S-d“ or "S--" to indicate the low-
pressure transducer or “S-t” for the temperature
transducer (see figure 18). The “WARNING” legend,
along with either the Temperature digits or the Depth
digits and the error code will flash once per second.
In the highly unlikely situation were both sensors are
detected as having errors, the display will alternate
between “S-d“ or "S--" and “S-t”. This warning will be
issued whether the computer is in the Surface
Interval, Dive Mode, Decompression Mode or Post
Dive Interval. In the unlikely case that your computer
issues one of these warnings the unit should be
returned to the factory for evaluation and/or repair.
Figure 18 shows a Sensor Warning, in this case a
Depth Sensor, as it would be displayed in the Dive
Mode. If the Sensor Warning was for the temperature
sensor it would display “S-t“.
DATA STORAGE TYPES & CAPACITY: The
COMMANDER has the following internal distinct data
storage activities that can be recalled, viewed, and
stored with the Analyst
®
PC computer interface:
•
Current Variable Information: Local Time,
Altitude, Battery voltage, Current unit
Temperature, and 16 tissue loading.
•
Current Configuration Data: As can be seen in
“USER CONFIGURABLE ITEMS”, below.
•
Historical Totals Summaries: Dive Time,
Number of Dives, Number of Marginal Dives,
Number of Violated Dives, Number of Warnings,
Decompression Dives, Decompression Time,
Maximum Depth and Ceiling, Maximum Depth
and Ceiling Dive Number.