Cochran COMMANDER, Руководство пользователя

Страница: 27 / 44

2 5
seamless manner. From the factory, this is set to
‘Off’, seamless altitude from sea level to 15,000 feet.
Select Alternate Screen Viewing Time (3 to 10):
This option allows the diver to set the amount of time
that the Alternate Screen will be viewed once it has
been accessed. From the factory this is set to 4.
Select Display Backlight On Time (0 to 99): This
option allows the user to set the amount of time, in
seconds, that the TACLITE™ stays on once activated.
If this option is set to "0" the TACLITE™ will never
activate, if set to "99" the TACLITE™ will stay on all
the time and only turn off when the COMMANDER
does. This option may also be set via the Touch
Contact Programming. From the factory this is set to
10.
Select Audible Beeper Alarm (On or Off):
This
allows the user to enable or disable the Audible
Alarms and beeper. As shipped from the factory, this
is set to ‘On’.
Select Ceiling Display Divided by 10 (On or Off):
This option allows the diver to select when in the
Decompression Mode the Ceilings are displayed as 1
= 10, 2 = 20, 3 = 30 etc. (On) or as 10, 20, 30 etc
(Off). From the factory this option is set to ‘Off’.
Selectable NDC Conservatism (0% to 50%): This
feature allows the diver to input an added degree of
conservatism to the decompression algorithm from 0
to 50 percent in one-percent increments. This may be
desirable if the diver is dehydrated, tired, or has some
other factor that warrants added conservatism. This
option may also be set via the Touch Contact
Programming. Conservatism is set to ‘0%’ as shipped
from the factory.
Confined Water Protocol (Training Mode) -
(Enabled or Disabled):
This option enables the
Training Mode for the COMMANDER. In this mode
the COMMANDER will enter the Dive Mode at 2 feet
instead of 5 feet and exit the Dive Mode at 1 foot
instead of 3 feet. The Training Mode also permits the
selection of an increased Post Dive Interval period
from 10 to 30 minutes in one-minute increments.
These changes permit the Instructor to record a
complete training session, including in-water surface
periods, as a single dive. As shipped from the factory,
this is set to ‘Disabled’.
This option can only be
‘Enabled’ via the Professional Edition of the
Analyst
®
.