Cobra ACG196, Полная инструкция, Страница: 60 / 100

COMPLETE INSTRUCTIONS G100-G300
60
12 - RADIOCONTROL FUNCTIONS CHECK.
Perform the checking operations in the
sequence described below. The tests must
be carried out within the 25 s inhibition
time-limit. Once this time-limit has expired an
alarm state will be generated (sirena and
blinker).
FUNCTIONAL TEST TO CHECK THE
ULTRASONIC SENSOR (IF FORESEEN)
Perform the checking operations in the
sequence described below.
FUNCTIONAL TEST TO CHECK
PERIMETRAL PROTECTION
Arm the alarm system by pressing
radiocontrol button “A“. The
direction indicators flash
twice, while the buzzer emits
t w o a c o u s t i c s i g n a l s (if
enabled).Check that there is no
moving object inside the
passenger compartment. Close
the doors, bonnet and boot keeping
two windows on the same side
partially open (10 centimetre
opening).
Put your hand inside and move it
around at the level of the front
seat’s head-rest.
If the LED goes out as each
movement is recorded, the sensor
is operating correctly.
Arm the alarm system by
pressing button “A“ and strike
each window with the palm of
your hand. The LED must remain
lit up with a steady light
(meaning no false alarms are being
recorded).
Disarm the alarm system by
pressing radiocontrol button “B“
and close the windows.
Repeat the test for the other doors
connected and for the bonnet and
boot
Disarm the alarm system by
pressing radiocontrol button “B“.
The direction indicators flash 4
times (alarm record). The doors
unlock and the LED flashes to
indicate the cause of the alarm
Arm the alarm system by pressing
radiocontrol button “A“.The
direction indicators flash
twice, while the buzzer emits
t w o a c o u s t i c s i g n a l s (if
enabled). The doors lock.
The LED lights up.
Wait for 25 s.
Open a door with the key. The
siren sounds and the direction
indicators flash.Close the door.
Turn off the siren using radiocontrol
button “B“.
B
A
06DE2373Acorrect version.pmd 16/03/2007, 11.07 60